 |
|
|
| |
|
 |
MA-40 ARC PATTERN CONTROL
This unit adds a new dimension to magnetic arc control: pattern
control. With the MA-40, the welding arc can be shaped, widened
or narrowed as required. The rapid, controlled motion of the
arc stirs the molten puddle for a noticeable reduction in
porosity and improvement of the grain structure in the weld.
The MA-40 Control Unit provides two-axis magnetic arc control
with independent amplitude and position control for each axis.
A stabilize mode with amplitude and position control adjustments
is also available for one-axis oscillation.
View the MA-40
Control Panel |
| |
|
|
|
|
|
| |
|
MA-20 ARC
CONTROL
Our most popular controller, the MA-20 features a PWM power
supply and adjustable oscilation speeds from 7 per minute
to 30 per second. Independently controlled left and right
dwell settings create a weave effect, allowing maximum flexibility
when working with an uneven work piece. A Stabilize/Oscillate
switch allows you to disable the speed and dwell controls
while the position and amplitude controls remain operative.
Final Taper gradually reduces magnetic field during welding
down-slope. |
 |
|
|
Watch a video of
the MA-20 and the MP-100 controlling
a 350-amp arc.
View the MA-20
Control Panel |
| |
| |
 |
MA-10 ARC STABILIZER
The MA-10 is strictly for arc stabilizing. It is used to compensate
for magnetic arc blow and it is used to keep the arc coned in
and stable in the weld zone. |
| The MA-10 has a high
and low range with adjustable gauss strength in each range.
Polarity is selected with a front panel switch. |
| |
AP Automation Magnetic Arc Control
Systems are fully compatible with all Cyclomatic™
equipment.
Magnetic Arc Control
Specifications |
| |
|
|
|
Home>Products>Magnetic Arc Control>Equipment: Control Units
|
|
| |
